Automatic service lifts with conveyors

Automatic lifts

LIFT TECHNIQUE

SKG SSL

			Automatic Lifts
			Apart from our production of standard Service Lifts we also offer semi-automatic or automatic Tote-Box-Systems.

			The basic system and components are similar to the pre-assembled construction style of our Service Lifts. The automatic lift includes vertical bi-parting doors with
			24 V motor, to open and close the door automatically, independent of the cabin doors. In the car a driven belt device will drive into, and discharge from the cabin the tote boxes. In front of each landing is a load- and unload- roller conveyor to carry 2 or 3 boxes and code lines at each box for easy pre-setting.

	Gravity roller conveyors


	Structure
	Self supporting and free standing steel structure made of cold rolled
	galvanised profiles, pre-mounted in 2 m - sections with trunking and t-guide

	Car (Cabin)
	Made of folded galvanised steel sheets, guided on both sides with adjustable
	guide shoes. Motorized belt driven insert in the car.

	Landing doors
	Vertical bi-parting doors, made of galvanised steel, in accordance to DIN 18092
	with approved door locks. Each landing door has it`s own 24 Volt motor to open
	and close the door automatically. Fire-resistance up to 2 h upon request.

	Counterweight
	With solid steel-frames and infill of iron blocks 50 x 50 mm, adjustable guide		Gravity roller conveyors
	shoes.

			Drive-unit
			Lift machine (made in Germany)on top of the shaft, with hardened twin groove
			sheave, speed 0,40 m sec. The machine is mounted on steel beams, having
			a high quality reduction gear, magnetic disc brake and hand wheel, protection
			or class IP 54, power supply 400 V 50 Hz, three phase. Speed 0,8 - 1 m sec
			frequency control upon request.

			Controller
			High security through transformer and 24 volt system, pluggable and pre-wired.
			SPS (computer programmable) control system compressed equipment in
			a lockablecontroller box. Each project will be prepared to the clients
			requirements.
	Powered twin conveyors


	System
	Each landing door has its own 24 Volt
	motor to open and close the door
	automatically independent of the cabin
	door. In the car a driven belt device will		Code-Slider on transport box

	draw into and eject from the cabin our
	standard tote boxes. In front of each landing is a load and unload roller conveyor to carry 2 resp. 3 boxes.
	There are photocells in the lift car to read the destination of the box. Our standard tote box is made of heavy
	duty polypropylene for smooth running, size 400 x 600 x 300 mm. Each box has a slider to set the destinated
	floor marking easily. The roller conveyors have PVC-rollers. The frame work is made of folded galvanised steel
	profiles in "office design". The photocells and switches are well protected in the frames.

	Operation mode
	Set the slider at the box for the designated floor and put the box on the upper roller conveyor. This conveyor
	has an automatic device to keep the first box away from the landing door and also to keep the second box away
	from the first. The computer will notify that there is a box waiting and will send the car to pick it up. The door
	opens automatically after arrival and the belt will draw the box into the car. Photocells read the destination.
	Door closes automatically and car delivers the box to the floor indicated on the slider. After opening the landing
	door, the belt ejects the box to the unloading conveyor. Complete automatic operation will be carried out
	without human assistance or recall.

			Options
			Capacity of 100 or 200 kg, Car and doors made
			from stainless steel, Speed 0,8 - 1,0 - 3 m/sec,
			Travel up to 150 m upon request.

			Download - Technical Info

				Brochure
				Automatic lifts with Tote Box System - info


			Producer of lifts applies a quality system according to
	Powered conveyor with separate controller		requirements EN-ISO-9001
			Lifts are made in conformity with EN-81

	® 2008 PANAS Lift Technique EU. Automatic service lifts with conveyors