|
|
Goods lifts |
|---|
|
| LIFT TECHNIQUE | ||||||
SKG
SSL
|
|---|
| ISO-MAX | ||||
| Capacity: 300 / 500 / 750 / 1000 kg | ||||
| The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m | ||||
 |
(capacity 300, 500, 750 and 1000 kg ) or 1,275 x 1,50 m (Capacity 750 and | |||
| 1000 kg) and a variable cabin height from 1,20 - 2,00 m. | ||||
| Lift unit complies to EU-Directive for machines and has a EU-Declaration | ||||
| of conformity of German TÜV Hannover / Sachsen-Anhalt e.V. | ||||
| Strengths | ||||
| Compared to a similar hydraulic freight elevator the ISO-MAX will offer you | ||||
| somes ignificant advantages and savings: | ||||
| • Corrosion-proof | ||||
| • Self-supporting galvanized steel structure | ||||
| • Shaft pit depth 270 mm only | ||||
| • Machine room less lift | ||||
| • Accessible spaces underneath the shaft possible | ||||
| • Easy mounting steel shaft cladding deliverable | ||||
| (no fire protection) | ||||
| • Space saving installation - compact construction | ||||
| • Pre-assembled for easy installation | ||||
| • No brick shaft necessary | ||||
ISO-MAX 750/1000 |
||||
|
||||
 |
||||
| Technical information | ||||
| The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. | ||||
Structure |
||||
• Steel structure, made of cold rolled galvanized special profiles |
||||
• Buffer PU 80/80 |
||||
• Compensation device on suspension |
||||
• Baffle plater |
||||
| Cabin | ||||
| • Cant-off system made of galvanized steel, adjustable guide shoes on | ||||
| both sides | ||||
• Special safety gear (type tested) |
||||
ISO-MAX 300/500 |
||||
Hinged doors |
||||
• Manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled |
||||
| by TÜV-authorities | ||||
• With side frames made of galvanized steel according to drawing |
||||
• Door locks type-tested by TÜV-authorities |
||||
Machine room door |
||||
• Double hinged door with sash lock |
||||
• With side frames made of galvanized steel according to drawing |
||||
Drive unit |
||||
• Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz |
||||
• 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 |
||||
Controller |
||||
• Call and send control with 24 V, safety circuit 230 V |
||||
• Pre-wired with plugs |
||||
• Adjustable and time-limited despatch delay device (1-5 s) |
||||
• Electronic overload contact |
||||
• Acoustic arrival signal |
||||
• Position indicator on each entrance |
||||
• Thermal motor protection as main switch pre-wired on control panel |
||||
• Machine room light with socket |
||||
| Finish options | ||||
| Beside standard finish option - galvanized - lifts can be provided in following finish options: stainless steel, covering Platal, prime painted et al.. | ||||
 |
ISO-PM 1000 |
|||
| Capacity: 1000 kg | ||||
Goods lift along directive 95/28/EG with max. 2 persons |
||||
• Corrosion-proof |
||||
• Self-supporting galvanized steel structure |
||||
• Shaft pit depth 270 mm only |
||||
• Cabin push button with send control - landing push buttons with call and send |
||||
| control | ||||
• Machine room less lift |
||||
|
• Accessible spaces underneath the shaft possible |
||||
• Easy mounting steel shaft cladding deliverable (no fire protection) |
||||
• Reducing of interference prone by setting a safety feature instead of cabin |
||||
|
door | |||
• Space saving installation - compact construction |
||||
• Pre-assembled for easy installation |
||||
| • No brick shaft necessary | ||||
ISO-PM 1000 |
||||
Technical information |
||
| The information given below lists main features of our goods lifts. Please do not hesitate to contact us for | ||
| further details. | ||
Structure |
||
• Steel structure, made of cold rolled galvanized special profiles |
||
• Buffer PU 80/80 |
||
• Compensation device on suspension |
||
• Baffle plater |
||
Cabin |
||
• Cant-off system made of galvanized steel, adjustable guide shoes on both sides |
||
• Safety light curtain |
||
• Cabin light - cabin ventilation |
||
• Type tested safety gear |
||
• Special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call |
||
• Special safety gear (type tested) |
||
Hinged doors |
||
• Manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled |
||
| by TÜV-authorities | ||
|
• With side frames made of galvanized steel according to drawing |
||
• Door locks type-tested by TÜV-authorities |
||
Maintenance room door |
||
• Hinged door with sash lock |
||
• With side frames made of galvanized steel |
||
Drive unit |
||
• Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz |
||
• 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 |
||
Controller |
||
• Cabin push button with send control |
||
• Landing push buttons with call and send control |
||
• Micro-processor technique in controller cabinet |
||
• Selector with absolute encoder |
||
| Finish options | ||
| Beside standard finish option - galvanized - lifts can be provided in following finish options: stainless steel, covering Platal, prime painted et al.. | ||
Download - Technical Info |
||
| Brochures | ||
Service lifts, goods Lifts - Info  |
||
Goods lifts ISO-MAX - Info  |
||
| Goods lifts ISO-PM 1000 - Info |
||
| Drawings | ||
| Goods lift ISO-MAX 500 |
||
| Goods lift ISO-MAX 750/1000 |
||
| Goods lift ISO-L |
||
| Goods lift ISO-PM 1000 |
||
Producer of lifts applies a quality system according to requirements EN-ISO-9001 |
||
Lifts are made in conformity with EN-81 |
||
| ® 2008 PANAS Lift Technique EU. Goods lifts | ||