Service lifts


  Service lift ISO-A - Machine below   Product Range

Lifts for utilization in restaurants - dumbwaiters, hotels, hospitals and private homes.

We present 4 different types of service lifts for different applications:
•  Bi-parting doors at serving height: ISO-A
    •  Bi-parting doors at floor level: ISO-C
    •  Hinged doors at floor level: ISO-D
    •  Cabin with 2 separate compartments: ISO-Z


    •  Low costs
    •  Galvanized construction
    •  Short delivery and installation times
  •  Pre-assembled plug-in controllers
      Service lift ISO-A - Machine above
  90 % of service lifts are made from pre-installed components. Therefore the installation times are reduced on site by 50 %. Thanks to a ingenious method of construction our service lifts can be used for almost any purpose and can be made according to your specification.  
  Technical Information  
  The information given below lists main features of our service lifts. As there are over 160 options available, please do not hesitate to contact us for further details.  
  Self supporting steel structure, made of cold rolled special profiles, fully galvanized, pre-assembled in 2 m sections including trunking.  
  Service lift ISO-C   Car
    Galvanized, guides on both sides with adjustable guide shoes. Units at serving
    height are provided with a removable shelf, car dims available in increments
    of 25 mm.
    Landing doors

Depending on type of lift bi-parting or single hinged doors accordance with

    DIN 18092 resp. 18090 are provided, with a galvanized finish and specially tested door locks. Bi-parting doors with safety door pulleys made of aluminium and
    3 mm diameter ropes. All doors are provided with door surrounds, ready for installation.
    Incorporates a steel frame and 50 x 50 steel inserts. Four adjustable guide shoes with polyamide inserts.
      Service lift ISO-D
  Machine room door  
  Hinged galvanized door, incorporating a lock.  
  Drive units  
  50 - 100 kg capacity with sheave for 2 ropes 200 - 300 kg capacity with 2 chains. Drive unit with hand wheel and disc brake, insulation type IP 54 400 V 50 Hz.  
  Service lift ISO-Z   •  Micro-processor controller
    •  High safety standard achieved using 24 volts on a control circuit, pre-
    assembled plug-in-system
    •  Call and send buttons on every landing
    •  Adjustable despatch mechanism, (up to 5 seconds delay)
    •  Arrival buzzer
    •  Position indicator on every landing

•  Motor protection switch as main switch on control panel

    •  Machine room light with switch and socket
    Finish options
    Beside standard finish option - galvanized - lifts can be provided in following
    finish options: stainless steel, covering Platal, prime painted et al..
    Download - Technical Info
    Service lifts, goods lifts - Info
        Service lift ISO-A
        service lift ISO-C
        service lift ISO-D
        service lift ISO-5
        service lift ISO-Z
Producer of lifts applies a quality system according to requirements EN-ISO-9001
Lifts are made in conformity with EN-81
  ® 2008 PANAS Lift Technique EU. Service lifts